Crochet Kitty Cat Poncho
The Crochet Kitty Cat Poncho is the perfect cozy and adorable addition to any little one's wardrobe. This cute garment combines the warmth of a poncho with the charm of a kitty cat design, making it an instant favorite for kids and parents alike. The soft yarn and intricate crochet work ensure that this poncho is not only stylish but also comfortable to wear. With its playful design and cozy feel, the Crochet Kitty Cat Poncho is sure to bring a smile to any child's face and keep them snug during chilly days.
Materials:
–Red Heart Yarns Super Saver in Oatmeal (1,090 yards–I bought 3 skeins)
–Red Heart Yarns Super Saver in Coffee (120 yards)
–Red Heart Yarns Super Saver in Soft White (10 yards)
–Red Heart Yarns Super Saver in Perfect Pink (1 yard)
-I-5.50mm Crochet Hook
–Polyfil (to stuff the tail)
–Stitch Markers
–Yarn Needle
–Scissors
NOTES:
-This project uses 1,220 yards of yarn. I am making the size Small/Medium. Keep reading to learn how to make this smaller or bigger.
-Use a smaller hook to make these smaller
-Use a bigger hook to make these bigger
-Weave in all the ends as you go so you don’t have to weave them all in at the very end.
-Your starting chain should be any multiple of 5 (I start with 75, you can start with 65, 75, 85, 95), Round 2 increases 5 stitches evenly. Rounds 3, 4, 5, 6, 7, 8, 9, and 10 increase by 10 stitches evenly each round. If you need to increase more, you can continue with the established pattern of increases and then go onto the instructions for the front of the poncho and the back of the poncho to create the front slits.
-If you want to make this smaller, stop increasing at any round (maybe round 5 or 6 so you have about 120 sts), then go onto instructions on making the front and back of the poncho.
-TURN YOUR WORK FOR EACH ROW!!!
-The measurements for this poncho are as follows: Tail: 9 inches (22.86 cm), slits in the front: 10 inches around (25.4cm), Shoulder to bottom: 27 inches (68.58cm), Across shoulders: 17 inches (43.18cm), Hood length: 16 inches (40.64cm), Waist: 48 inches around (121.92cm), Hips: 50 inches around (127 cm), Pockets: 4 inches deep (10.16cm)
-Please know you can make this bigger or smaller with very few mathematical changes.
If you need to make this bigger, here is the start of the pattern for a foundation chain of 85.
Ch 85
Rnd 1: Sl st to 1st ch to form a large ring (this should fit over your head), Ch up 2 (does not count as st), DC in each ch around, sl st to first DC. Turn. (85)
Rnd 2: Ch 2, [2DC in next st, 1 DC in next 16 sts] 5 times, sl st to first DC, Turn. (90)
Rnd 3: Ch 2, [2DC in next st, 1 DC in next 8 sts] 10 times, sl st to first DC, turn. (100)
Rnd 4: Ch 2, [2DC in next st, 1 DC in next 9 sts] 10 times, sl st to first DC, turn. (110)
Rnd 5: Ch 2, [2DC in next st, 1 DC in next 10 sts] 10 times, sl st to first DC, turn. (120)
Rnd 6: Ch 2, [2DC in next st, 1 DC in next 11 sts] 10 times, sl st to first DC, turn. (130)
And so on… I hope this makes sense and you are able to make this poncho. After Round 6, it is the established pattern to increase however big you need the poncho to be. Then you can go on to making the slits.
Special stitches:
- Ch(s): chain(s)
- YO: Yarn Over
- St(s): Stitch(es)
- BLO: Back Loops Only
- prev.: Previous
- Sl st: slip stitch
- SC: Single Crochet
- DC: Double Crochet
Pattern:
Poncho:
Ch 75 or any amount that is a multiple of 5 (55, 65, 75, 85 etc.)
Rnd 1: Sl st to 1st ch to form a large ring (this should fit over your head), Ch up 2 (does not count as st), DC in each ch around, sl st to first DC. Turn. (75)
Rnd 2: Ch 2, [2DC in next st, 1 DC in next 14 sts] 5 times, sl st to first DC, Turn. (80)
(if you chained a different amount than me, be sure to calculate your original chain amount + 5, then divide that sum by 5, that will be the amount of stitches you will have between your increases)
Rnd 3: Ch 2, [2DC in next st, 1 DC in next 7 sts] 10 times, sl st to first DC, turn. (90)
Rnd 4: Ch 2, [2DC in next st, 1 DC in next 8 sts] 10 times, sl st to first DC, turn. (100)
Rnd 5: Ch 2, [2DC in next st, 1 DC in next 9 sts] 10 times, sl st to first DC, turn. (110)
Rnd 6: Ch 2, [2DC in next st, 1 DC in next 10 sts] 10 times, sl st to first DC, turn. (120)
Rnd 7: Ch 2, [2DC in next st, 1 DC in next 11 sts] 10 times, sl st to first DC, turn. (130)
Rnd 8: Ch 2, [2DC in next st, 1 DC in next 12 sts] 10 times, sl st to first DC, turn. (140)
Rnd 9: Ch 2, [2DC in next st, 1 DC in next 13 sts] 10 times, sl st to first DC, turn. (150)
Rnd 10: Ch 2, [2DC in next st, 1 DC in next 14 sts] 10 times, sl st to first DC, turn. (160)
Continue with the established increase until your piece is wide enough, then go onto the instructions for round 11.
Rnds 11-25: Ch 2, DC in each st around, sl st to 1st DC, Turn. (160) (You can end early or continue to make it longer if you wish, continue onto the front of the poncho to make the slits when you are satisfied with the length)
Fasten off, weave in ends.
Front of Poncho:
Row 26: Mark 60 sts across the front, Attach yarn in first marked st, Ch 3 (counts as st), DC in each st to next marked st, leave the rest of the sts unworked, turn. (60)
Row 27-36: Ch 3, DC in each st across, turn. (60) Work these rows until it is 5 inches from row 26. You can end early if you want, or continue working rows to make it longer.
Fasten off, weave in ends.
Back of Poncho:
Row 26: Attach yarn to free stitch on Row 25 of poncho, Ch up 3 (counts as st), DC in each st across, turn. (100)
Rows 27-36: Ch 3, DC in each st across, turn. (100) Work these rows until it is 5 inches from row 26. You can end early if you want, or continue working rows to make it equal to the front of the poncho.
Do not fasten off, continue onto row 37
Row 37: DC in each st around connecting the Front and Back parts of the poncho, turn. (160)
Rounds 38-48: Ch 2 (does not count as st), DC in each st around, turn. (160)
Fasten off, weave in ends.
Change color to white
Row 49: Ch 2, DC in each st around. Fasten off. weave in ends. (160)
Hood:
Attach yarn to the top collar of poncho
Row 1: Ch 3 (Counts as st), DC in each st across, turn. (74/75 sts)
Row 2-26: Ch 3, DC in each st across. Turn.
Continue working rows until the hood measures 15 inches.
Fasten off with long tail for sewing. Sew the top of the hood closed
Weave in ends.
Assembly step:
SC around hood and slits in the front of poncho to clean up edges
Pockets: Make 2
With Main color
Ch 17
Row 1: DC in 4th ch from hook and across. turn. (15)
Rows 2-7: Ch 3 (counts as st), DC across. Turn. (15)
Continue to SC around 3 sides, Fasten off with long tail for sewing.
Make paw prints before sewing pockets to poncho.
Paw prints:
Toes: Make 8
With dark color:
Rnd 1: Ch 2, SC 6 in 2nd ch from hook
Fasten off with tail for sewing.
Palm of Paw: Work in BLO, Make 2
With Dark Color:
Rnd 1: Ch 2, 6 SC in 2nd ch from hook (work in continuous rounds)
Rnd 2: 2 SC in each st around. (12)
Rnd 3: [2SC in next, SC in next] 6 times. (18)
Rnd 4: [2SC in next st, SC in next 2 sts] 6 times. (24)
Fasten off with long tail for sewing.
Sew paws to pockets, then sew pockets to poncho.
Ears: Work in BLO, Make 2
With darker color,
Ch 2
Rnd 1: Ch 2, 6 SC in 2nd ch from hook (work in continuous rounds)
Rnd 2: SC in each st around. (6)
Rnd 3: 2 SC in each st around. (12)
Rnd 4: SC in each st around. (12)
Rnd 5: [2SC in next, SC in next] 6 times. (18)
Rnd 6: SC in each st around. (18)
Rnd 7: [2SC in next st, SC in next 2 sts] 6 times. (24)
Rnd 8-9: SC in each st around. (24)
Fasten off with long tail for sewing
Sew ears to hood.
Eyes: Make 2
With Dark Color:
Rnd 1: Ch 2, 6 SC in 2nd ch from hook (work in continuous rounds)
Rnd 2: 2 SC in each st around. (12)
Make a fleck with white in the eye for extra detail
Sew to hood
Assembly step:
Embroider Mouth and nose to hood
Hood stripes: Make 2
With Dark Color:
Ch 17 or any amount)
Row 1: DC in 4th ch from hook and across. (15)
Fasten off with long tail for sewing.
Sew to hood
Back Stripes: Make 3
With Dark Color:
Ch 47 (or any amount)
Row 1: DC in 4th ch and across. (45)
Fasten off with extra long tail for sewing.
Sew stripes to back of poncho
Tail: Work in BLO
With Main color, ch 2
Rnd 1: 6 SC in 2nd ch from hook (work in continuous rounds)
Rnd 2: 2 SC in each st around. (12)
Rnd 3: [2SC in next, SC in next] 6 times. (18)
Rnd 4-8: SC in each st around. (18)
Change color to Darker Color
Rnds 9-13: SC in each st around. (18)
Change color back to main color
Rnds 14-18: SC in each st around. (18)
Change color back to darker color
Rnds 19-23: SC in each st around. (18)
Change color back to main color
Rnds 24-28: SC in each st around. (18)
Continue if you’d like to make your tail longer. If not, Sl st closed and make button hole in middle
Assembly step:
Sew button to bottom of poncho in the back. Attach tail to poncho.
Weave in all ends.
Assembly Step:
Be sure to sew all your pieces to your poncho and weave in all the ends.